Stick with the 6to8. The tuning capabilities of the NEX head units do not come close to any external DSP. Once you get the new head unit in, retune the system. If you don't have a lot of experience tuning, seek out someone local to you who might be able to help.
Advice on using mosconi 6to8 with 8200nex vs just using built in crossover / TA
I currently have a 4runner with entune premium, no jbl, running to a mosconi 6to8 and then to an arc audio 1200.6 then to morel 2 way active fronts and mb quart subs. I am going to install a 8200nex in the next day or two because I am unsatisfied with the sound from the entune.
I was hoping for some advice on continuing to use the mosconi vs going straight to the 1200.6 and using the built in crossover/eq/TA in the 8200nex.
Current complaints with entune include hiss only controlled by turning mosconi input dial down to the minimum and levels significantly different between sources and overall poor sound despite endless tuning.
Thanks to anyone with advice!
I was hoping for some advice on continuing to use the mosconi vs going straight to the 1200.6 and using the built in crossover/eq/TA in the 8200nex.
Current complaints with entune include hiss only controlled by turning mosconi input dial down to the minimum and levels significantly different between sources and overall poor sound despite endless tuning.
Thanks to anyone with advice!
1 - 1 of 4 Posts
1 - 1 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
DIYMobileAudio.com Car Stereo Forum
A forum community dedicated to all mobile audio enthusiasts. Come join the discussion about capacitors, amplifiers, subwoofers, marine and automotive audio, troubleshooting, and more!
Full Forum Listing
Recommended Communities
