[rockinridgeline]

Just bought 2 Zapco DC1000.4 to get the processing that I was looking for, so this Alpine can be ready to ship as early as Wednesday. Attached a picture prior to the installation in my truck. This amp is functionally a 10 out of 10. Cosmetically it has some scratches on the aluminum fan cover. The two screws for the fan cover are missing. I will go to HD and get replacement screws prior to shipping.

I have it running 500W to a DIYMA 12" sub and 125 per channel to Dynaudio 340 3 ways. Sounds great, but I wanted to go 4 way active, so I bought the Zapcos.

Photo Sharing by MyPhotoAlbum.com :: MyPhotoAlbum :: mrv-f545

Here are the specs from the owners manual. I will send a copy of the .pdf file owners manual on cd if requested.

Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20
kHz)
Per channel into 4 ohms (0.3% THD) ...MRV-F545: 125Wx4
MRV-F345: 75Wx4
Per channel into 2 ohms (1% THD) ......MRV-F545: 250Wx4
MRV-F345: 150Wx4
Bridged into 4 ohms (0.3% THD) ........ MRV-F545: 125Wx2
+500Wx1
MRV-F345: 75Wx2+300Wx1
Frequency Response ................... 10 Hz to 50 kHz (+0, –1 dB)
Signal-to-Noise Ratio
(referenced to rated power) .......................................... 93 dBA
(CEA-2006) .................................................................. 73 dBA
Input Sensitivity (for rated power
output) ............................................................. 200mV to 4.0V
Input Impedance ....................................... Line in: 10k ohms<
Speaker Impedance ............................... 4 or 2 ohms (Stereo),
4 ohms (Bridged)
Active Dividing Network Frequency and
Slope ....................................... 30 to 400 Hz, 12 dB per octave
Power Requirement .................. 11 – 16V DC Negative Ground
Dimensions (W x H x D)
MRV-F545 ................................ 420mm x 228mm x 60mm
MRV-F345 ............................... 330mm x 228mm x 60mm
Weight
MRV-F545 ................................................................ 5.6 kg
MRV-F345 ................................................................ 4.2 kg

This amp has built in crossovers, voltage display. Will connect with some alpine radios with Ai-net and show all amp status on the head unit display.

This amp is being sold new on ebay for $400. I will sell shipped to continental 48 via UPS or FedEx ground insured for $250.

I have flawless feedback on ebay under trgutermuth. Any questions LMK.

 

[rockinridgeline]

bump

 

[rockinridgeline]

bump

 

[rockinridgeline]

$225 shipped to lower 48.

 

[rockinridgeline]

$200 shipped. This thing puts out a real 500 watts bridged plus 125 per channel to the front speakers.

If no bites by the end of the day tomorrow, it is going on ebay.

 

[rockinridgeline]

morning bumpage

 

[rockinridgeline]

make me an offer or it is going to ebay tonight

 

[rockinridgeline]

I have a couple of offers that are close. first $190 shipped. I just took pics for ebay a few minutes ago. save me the trouble!!!!

A great deal for a real 750 watts. runs my DIYMA 12 with gusto!

 

[rockinridgeline]

gone to ebay