Car Stereo Forum banner
1 - 1 of 5 Posts

· Registered
2,468 Posts
Have you checked voltage at the amp terminals? If not do it multiple times to make sure you don't have an intermittent loose-connection issue or something like that. Those amps aren't necessarily quality from a pureness-of-signal point of view, but I've run them down to 0.5 ohm, clipped them to hell and driven system voltage to the low 10's and they still keep working. Definitely don't rule out a bad amp though.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.