DiyMobileAudio.com Car Stereo Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
433 Posts
Discussion Starter · #1 ·
I am toying with using the DQX2496 in my install, but I am not confident that I will get the unbalanced/balanced/unbalanced conversion right and noise free. Based on other threads, I understand what needs to be done physically to convert the XLR plugs to RCA. However, I am quite unclear as to the electrical side of the conversion. I assume I need to do something. There have been a few mentions of the use of transformers, but nothing specific. Can anyone help me out here?

A sticky that includes the exhaustive list of steps needed to integrate a balanced 120v processor into a 12v unbalanced mobile audio environment would be extremely helpful. Especially once the noise free 12v power supply is available;)
 
1 - 1 of 1 Posts
Top