[Slave2myXJ]

Just to note, a 3/8" brass stud is good for 400A while a steel 3/8" stud is only good for 250A...

 

[Slave2myXJ]

Another thing to note is that between the two crimps and the two bolted joints, you're adding 20,30,50 ft of 4 ga wire to the circuit, voltage drop wise. Running a single piece of wire will always be better than having connections, if you can do it. I should have 4 of the pass-thru connectors discussed just before this for 1/0. I'll send you one, if you want...

Amazon.com