DiyMobileAudio.com Car Stereo Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
Im starting on my sub box for my boat system. My question is, what are the specs to look for on doing an IB sub config.? Im using 2 older I.D.10's that I already have under the rear bench seat in the middle firing foreward and slightly down. The reason that I cant easily seal the box is due to the rear cushions also mount up high to meet the engine cover to make a large bed. Great option for a little cove action, if you know what I mean.

The area boxed off is about 32" L x 12"h x 18" deep. I have to leave openings, appx 3" holes, in the top of the box for 2) 2"x 18" aluminum pipe risers to mount into sockets in the floor and bottom of the seat when used as a large bed. Therefore sealing the box would be very difficult. Im thinkint about this as a Quasi I.B. design. Doable or sound like crap? It is in a boat in an open area.
 
1 - 1 of 1 Posts
Top