DiyMobileAudio.com Car Stereo Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,416 Posts
Discussion Starter · #1 ·
I bought this Cadence amp a few months back from an authorized dealer. BNIB. Very compact considering the power output. I ship by Fedex with tracking and insurance. $200 shipped.

DCA-1000.1 - Cadence 2000 Watt 1 Ch Daytona SPL Competition Amplifier

SPECIFICATIONS:
◦4 Ohm RMS Power: 1 x 25 Watts @ 13.8 Volts
◦2 Ohm RMS Power: 1 x 750 Watts @ 13.8 Volts
◦1 Ohm RMS Power: 1 x 1000 Watts @ 13.8 Volts
◦2 Amps Bridged: 1 x 2000 Watts
◦Frequency Response: 10Hz - 500Hz
◦S/N Ratio: >100 db
◦Damping Factor: >500 @ 100Hz
◦Minimum THD: <0.03%
◦Input Voltage: 200 mV - 6 Volts
◦Dimensions: 11" x 9.5" x 3.5"

FEATURES:
◦High Speed Mosfet Power Supply
◦Bi-Polar Japanese Sanken Output Devices
◦Double Sided Copper Rail PCB Architecture
◦24 dB Crossover Circuitry
◦Low Pass Crossover: 35Hz - 250Hz
◦Subsonic Filter: 10Hz - 50Hz
◦Bass Boost Equalization: 0-18db @ 45Hz
◦Lucite Encapsulated Large 2 and 4 Gauge Terminals
◦Dash Board Bass Remote
◦Dual-Amp Bridging for Double the Power @ 2 Ohms
◦Master/Slave Control
◦Adjustable Phase Control
◦Soft Start Mute & Delay
◦Tiffany Style RCA Line-In/Line-Out Jacks
◦24db Crossover Roll Off
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top