DiyMobileAudio.com Car Stereo Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
372 Posts
Discussion Starter #1
Background:

I am playing with REW now with the help of another member on here (who has been super awesome). While taking measurements, he found that the widebands on the dash (CDT Unity 8.0) and the mid-woofers in the doors (Morel Tempo Ultra 6x9) were tracing too closely to one another. After further investigation, I found that even though I had all the channels except the one I was measuring muted, (for instance the right side dash assigned channel was active, and all other channels were muted) the right side door was still playing.

I am at a complete loss, and am unsure of where I went wrong!

I have the head unit's RCAs as follows:

Head unit front right to DSP input 1
Head unit front left to DSP input 2
Head unit rear right to DSP input 3
Head unit rear left to DSP input 4

And then the assignments as follows:


292863


I wonder if there is an issue with the "wired remote" or something lol

Any help is appreciated!

Thank you,

Ron
 

·
Registered
Joined
·
814 Posts
I don’t know why but try just using input 1&2 for L&R and put the midbass and tweeter on the same input. Don’t use the rear. In fact unplug it. Try and see.
 

·
Listener of Music
Joined
·
3,788 Posts
Get rid of the rear inputs. You can alternate the sub as well.
 
1 - 5 of 5 Posts
Top