DiyMobileAudio.com Car Stereo Forum banner

1 - 20 of 39 Posts

·
Registered
Joined
·
271 Posts
Discussion Starter #1
Got an itch to upgrade my home theater, and wife says I've got to move some stuff, first. Not interested in trades (well, not unless you've got a set of JTR Noesis 212HT's or an Anthem D2v laying around...)

Product Brand & Model:

1. Audiomobile MASS 2012 D4 (12", Dual 4Ω) (Qty.2)

2. Dayton Audio RSS315HO-4 (12", Single 4Ω)

3. Dayton Audio RSS315HO-44 (12", Dual 4Ω) (Qty. 2)

4. MB Quart QM210TC, 8" mids (Qty. 3)

5. MB Quart QM25HC, 1" Titanium dome tweeter w/bezels and crossovers (pair)

6. MB Quart QM1113KX, 5-1/4" coaxial (pair)

7. Carrozzeria (Pioneer) CD-1000x 3-way, 4-channel active (preamp) crossover


Condition of all items:

1. 8/10 - Present well, coils on both drivers measure 3.7Ω. A little schmutz on the rubber gasket, but will clean off. Surrounds in perfect shape. No dings in cones. One looks like it had the dust cap re-glued and wasn't a perfect job, but is secure and doesn't affect operation. A little oxidation on the backsides, but nothing major.

2. 8/10 – Has a touched-up scratch on the cone (seen in pic) but otherwise looks new. Coil measures 3.3Ω. Has the remains of a gasket on the backside of the flange.

3. 9/10 (only because they’re not NEW) – look like they’ve never been out of the boxes. All coils measure 3.4Ω.

4. These are the old pulp-coned mids. 2 of the mids have had the trim rings removed, but it’s a clean (not hacked) job. Slight deformity of one of the surrounds due to having been stored with a trim ring on top of it that shifted, but otherwise no rips/tears/punctures. Other mid looks like new, with trim ring intact. Grilles included. All drivers measure 3.6Ω

5. 8/10 – nice shape, with no dents in the domes. Both surface and flush-mount bezels and crossovers included. Both drivers measure 3.4-3.6Ω.

6. 6/10 – Purely cosmetic… some paint rubbed off the grilles, fastener marks around holes, and some sealant/sound deadener residue on the backsides. Both drivers measure 2.8-2.9Ω.

7. 8/10 (Conservatively) – Face plate is very nice, with no discernible scars and all lettering/labels intact. A couple of the screws look a bit oxidized, but could be cleaned and re-sprayed to look new. Very nice condition. I bought this from another DIYMA member a few years back thinking I’d use it (I had one before, and always regretted selling it), but plans changed and it sat on a shelf, all wrapped up and boxed.


Total Price:

(All prices OBO, Paypal fees included... I don't ask for "gift" payments.)

1. $200 (each), $365 for the pair

2. $100

3. $120 (each), $220 for the pair

4. $35ea. for the two with the trim cut off, $40 for the one with the trim intact.

5. $80 (pair)

6. $65 (pair)

7. $125


Shipping Terms:

All prices are plus actual shipping. However, I get fantastic shipping rates through the company I work for, so I guarantee you won’t get gouged. If I think the rate quote is more than I’d be willing to pay if I was buying, I’ll work out a deal with you to absorb some of the cost. Heavy stuff (like subs) can get pricey!


Pictures:

1. Audiomobile MASS 2012 D4 (12", Dual 4Ω)




2. Dayton Audio RSS315HO-4 (12", Single 4Ω)




3. Dayton Audio RSS315HO-44 (12", Dual 4Ω)






4. MB Quart QM210TC, 8" mids




5. MB Quart QM25HC, 1" Titanium dome tweeter w/bezels and crossovers



6. MB Quart QM1113KX, 5-1/4" coaxial




7. Carrozzeria (Pioneer) CD-1000x






Additional info:

I was hording the subs for building new HT subs, but decided that bigger is better. I’m sure I’ll regret getting rid of the Audiomobile subs, but I’ve already purchased a pair of SI HT18’s. I don’t think I’ll miss the 12’s.

I also have a pair of QM160TX2 6-1/2” pulp-cone mids and assorted grilles and hardware for same, but didn’t bother to list them as the cones appear to be sagging a bit (improper storage). The coils measure fine (2.9Ω on both). If someone wants the whole lot of MB Quart stuff, I’ll throw these in for free.



** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------

Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:

1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.

DO NOT proceed with a deal until you are completely satisfied with the other party.

DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
 

·
Registered
Joined
·
271 Posts
Discussion Starter #4
Thanks, Danno!

PM's replied... One Audiomobile sub spoken for, pending shipping quote.

Sagging Quart mids also pending.
 

·
Registered
Joined
·
22 Posts
Not familiar with the Pioneer X-over...could I use it as the crossover for a midbass, midrange & tweeter 3 way component set?
 

·
Registered
Joined
·
950 Posts
Anyone familiar with the recommended freq and power for the Quartz 4, 5 and 6? Its been years since Ive played with these. Might be a viable candidate for a project of mine
 

·
Registered
Joined
·
271 Posts
Discussion Starter #8
Not familiar with the Pioneer X-over...could I use it as the crossover for a midbass, midrange & tweeter 3 way component set?

Yes. It has hi/mid/lo outputs for front and rear channels, with stereo subwoofer output. It's designed for a 3-way plus sub.
 

·
Registered
Joined
·
271 Posts
Discussion Starter #9
Anyone familiar with the recommended freq and power for the Quartz 4, 5 and 6? Its been years since Ive played with these. Might be a viable candidate for a project of mine

I honestly don't know. It's been a long time since I've seen any documentation or specs for these.
 

·
Registered
Joined
·
756 Posts
Thanks, Danno!

PM's replied... One Audiomobile sub spoken for, pending shipping quote.

Sagging Quart mids also pending.

A little late too....was looking at picking up another one in good shape. :(
 

·
Registered
Joined
·
271 Posts
Discussion Starter #11
A little late too....was looking at picking up another one in good shape. :(
Sorry! I didn't think these would generate as much interest as they did.

BOTH Audiomobiles are pending. I'll be getting shipping quotes to the interested parties, today.

All PM's replied to...
 

·
Registered
Joined
·
271 Posts
Discussion Starter #12
One Audiomobile gone, one still available (the one with the re-glued dust cap).

Since I can't edit my original post, price on the Pioneer Carrozzeria is FIRM. It's a great piece in nice condition, and if I don't get my asking price, I'll just keep it. Might make a cool piece to do an active speaker system in a home 2-channel setup.
 

·
Registered
Joined
·
2,909 Posts
Anyone familiar with the recommended freq and power for the Quartz 4, 5 and 6? Its been years since Ive played with these. Might be a viable candidate for a project of mine
what kind of project, deepmuffdiver? i remember those a friend of mine had running off of deck power way back. actually wasn't bad.

price on the Pioneer Carrozzeria is FIRM. It's a great piece in nice condition,
made in japan should carry a premium :)
 

·
Registered
Joined
·
1,997 Posts
JTR Noesis 212s huh? Not many know about those. I have some but you'd have to give me the car your equipment was installed in before I'd consider selling them. :) Good choice on some amazing HT speakers. Good luck with sale.

Do you hang out in the JTR thread on AVS?
 

·
Registered
Joined
·
630 Posts
Consider any trades for the MBQ 8's?
 

·
Registered
Joined
·
271 Posts
Discussion Starter #17
JTR Noesis 212s huh? Not many know about those. I have some but you'd have to give me the car your equipment was installed in before I'd consider selling them. :) Good choice on some amazing HT speakers. Good luck with sale.

Do you hang out in the JTR thread on AVS?
I haven't been hanging out there, but I've been doing a fair amount of reading on those, and Seaton's offerings. Since I already have gobs of available amp power, I've pretty much ruled out the Catalysts.

I really wish I could A/B the Noesis vs. the Triple 12's, as there's a set of the latter on usaudiomart for a good price, taking into account the exchange rate (but shipping would probably eat up any savings).
 

·
Registered
Joined
·
271 Posts
Discussion Starter #19 (Edited)
Update:

The "questionable" QM160TX2 mids have been sold, along with the grilles and hardware.

I'm open to reasonable offers (and maybe an unreasonable offer or two) on all this stuff, except for the aforementioned Carrozzeria X-over. Let's hear 'em! :)


edit: Carrozzeria x-over sold, as well. Thanks, guys!
 

·
Registered
Joined
·
271 Posts
Discussion Starter #20
PM's replied bump...

Still got one MASS available, as well as the Dayton subs!! :)
 
1 - 20 of 39 Posts
Top