Sounds like a bad earth in the dash loom, run a seperate earth off the back of the unit and try again.
Clicks, Pops, alternator whine
Just getting a new KDC-X994 into the dash with a Metra 99-3303 kit.
While I was waiting for the kit I had the HU in the back connected with the amps and cross-overs sharing the same ground and power connections, etc.
As soon as I moved it up front I noticed an increase in hiss (I never heard ANY with the HU in the back). And today when I drove it for the first time I get a pop when I hit the brakes, or have a windshield wiper come across, turn signal cancel etc.
Also I notice alternator whine now as I rev up the car with the volume all the way down.
Is the normal fix to take the ground OUT of the factory harness connections and try straight to the chassis, or some other ideas?
Alan
While I was waiting for the kit I had the HU in the back connected with the amps and cross-overs sharing the same ground and power connections, etc.
As soon as I moved it up front I noticed an increase in hiss (I never heard ANY with the HU in the back). And today when I drove it for the first time I get a pop when I hit the brakes, or have a windshield wiper come across, turn signal cancel etc.
Also I notice alternator whine now as I rev up the car with the volume all the way down.
Is the normal fix to take the ground OUT of the factory harness connections and try straight to the chassis, or some other ideas?
Alan
1 - 2 of 2 Posts
1 - 2 of 2 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
DIYMobileAudio.com Car Stereo Forum
A forum community dedicated to all mobile audio enthusiasts. Come join the discussion about capacitors, amplifiers, subwoofers, marine and automotive audio, troubleshooting, and more!
Full Forum Listing
Top Contributors this Month
View All
ItsonlyaHONDA
482 Replies
BobTheBirdTurd
368 Replies
Nemesis87
278 Replies
Recommended Communities
