DiyMobileAudio.com Car Stereo Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
367 Posts
I recently picked up a Denon DCT-R1. I have a quick questions, what would the "INT. REMO" wire be used for (pink/white wire)? I only ask because there is no illumination wire or power antenna wire on the harness :confused: Please help me out if you can. Thanks :)

Hey Mark, Take a meter, and see if it gets 12V+ when you turn it on. If so, then this would be your power ant, or amp remote wire. AMP REMOTE if you get 12v when tuner or cd is on. PWR ANT if you only get 12V+ when the tuner is on. If you don't get any 12V+, then I have no clue what this wire is for...But you probably already know all of this. Just seeing if you checked...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top