DiyMobileAudio.com Car Stereo Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Good afternoon,

Let me start out by saying I come from a SPL competition background. However I’m looking to dip my toes into getting a feel for time alignment and equalization. I have a Kicker KEY180.4 and looking for raw drivers or a component set to run active. The crossover is a fixed 3.2kHz with a 24dB slope. Power is limited at 45wrms @ 4 ohms. Midbass can be a 6.5-7” and tweeter needs to be small format. Strong midbass and output given the limited power would be a benefit but I know I’m asking a lot. It’s all going in a new vehicle so I want to keep it simple. I’ll be starting another install after with a real DSP (most likely the Dayton) and less driver limitations and more power. Any recommendations or suggestions would be great. This is just a simple install for my wife’s daily to get a feel until I do my install.

Suggestions for a small subwoofer suggestion and amplifier welcome also

Thanks
 

·
Registered
Joined
·
1,743 Posts
1 - 2 of 2 Posts
Top