DiyMobileAudio.com Car Stereo Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
i am currently running a DSR1 from my factory head unit.
my front stage currently is Morel Maximo 6 component set.
imp hearing and reading many opinions on the crossover in the dsp feeding the amp then into a passive crossover.
i also read somewhere about band passing them. Would a crossover slope set in the DSP say HPF of 70hz @12dB/oct stack with the passive crossover coming from the amp?
i cant go full active just yet, so the other 2 channels are feeding the morel Maximo coax 6 in the rears. which i also have the same question with.

Any advice would be greatly appreciated!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top