DIYMobileAudio.com Car Stereo Forum banner
1 - 17 of 17 Posts

· Registered
Joined
·
501 Posts
Discussion Starter · #1 ·
Just bought this off fellow member MACS about 2 weeks ago. I can't get it to work with my dash due to the motorized face without doing a few modifications so its up for grabs. Just looking to get back what I paid which is 175 shipped. You can see all the info from MACS thread here:

http://www.diymobileaudio.com/forum...ecks-cd7000-cd8454-ipc-106-i-pod-adapter.html

I prefer paypal and have numerous refs on here and tons over at caraudio.com
 

· Registered
Joined
·
501 Posts
Discussion Starter · #2 ·
whoops..I see he already removed his pics...I will get some fresh pics up by tomorrow night.
 

· Registered
Joined
·
501 Posts
Discussion Starter · #3 ·
well I suck at taking pics of decks but I did the best I could. Deck looks even better than the pics show.






 

· Registered
Joined
·
501 Posts
Discussion Starter · #4 ·
For an extra 10 dollars I will also include a nib Eclipse AUX105 cable. With this cable you can add an auxiliary input using the changer port on the back of your Eclipse and you'll have a pair of female RCA inputs ready for your portable music player, satellite radio tuner, or other external source. Cable sells for 30 dollars elsewhere.

 

· Registered
Joined
·
972 Posts
do you have the manual for this? How many output channels does it have? How many channels of time alignment? I have a 4 way system, wanting to go active throughout. My alpine falls a little short on having the crossover freq. I need. I need subs from 60 down, midbass from 60-700. midrange from 700-4K, tweets from 4K up. These are the crossover points on the passive crossovers. My Alpine deck won't give me bandpass for the midrange from 700-4K. It only goes HP for the mid at 1K, which is too high. LMK thanks.
 

· Registered
Joined
·
501 Posts
Discussion Starter · #13 ·
^^^I was actually going to post that same link. I had posted it over on the other forum but I guess I forgot to here. The unit is 3 way capable and the crossover settings are as follows:

low pass: 63Hz-200Hz
Mid high pass: 63Hz-200Hz
Mid low pass: 200Hz-10kHz
High pass: 200Hz-10kHz
slope settings: pass/6/12/18/24dB/octave
 

· Registered
Joined
·
501 Posts
Discussion Starter · #14 ·
bump....someone need a nice active capable head unit. This is a solid deck for the price. Beats out a lot of the newer crap other companies are producing nowadays.
 

· Registered
Joined
·
465 Posts
Bump for one awesome deck. Got one myself. :D
 
1 - 17 of 17 Posts
Top