DiyMobileAudio.com Car Stereo Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Premium Member
Joined
·
730 Posts
Discussion Starter #1
2 used Eclipse Demo amps for sale.. These were in one of our Demo vehicles until last year, then been sitting on a shelf since... Be warned the big Mono amp (ZA1200) is not the prettiest of shape, but is a solid Workhorse... I tried to post enough pics to see the scratches, etc.. also the mono amp is missing one screw that holds end cap (see pic), actually the screw is broke there, but easily drilled out..

The 4 ch. amp is still in really GREAT shape, as you can see from pics.

Anyway, IF you can live with a mono amp thats a little on theh ugly cosmetic side, and a really NICE 4 channel then you could have a hell of a system going.... These were close to $1000 a few years ago for the pair.

ZA1200 - $200 + shipping
XA4200 - $200 + shipping

Buy BOTH and its only $300 and I pay shipping (hint, like to have pair go to one person)

CONUS only...













ZA1200

ZA Series Class D Monoblock Car Amplifier
RMS Power Rating:

4 ohms: 1000 watts x 1 chan.
2 ohms: 1200 watts x 1 chan.

Max power output: 1500 watts
MOSFET power supply
Bass Remote Details (Wired remote bass level control included)
LED power indicators
Bass Boost (0-8 dB at 50 Hz)
Bass boost frequency selection (32-64 Hz)
Mono channel operation
Protection temperature (90 C)
Heavy duty aluminum alloy heatsink
RCA level inputs
Screw terminals
Variable low-pass filter (40-500 Hz, Linkwitz Riley 18 dB/octave)
Subsonic Filter (18 dB at 20 Hz)
CEA-2006 compliant amplifier
Frequency response: 20-20,000 Hz
Input sensitivity: 1.2V-8V
Damping Factor: 100
Dimensions: 12-1/4"L x 10-1/8"W x 2-3/8"H

XA4200

XA Series 4-Channel Class D Car Amplifier
RMS Power Rating:

4 ohms: 100 watts x 4 chan.
2 ohms: 200 watts x 4 chan.
Bridged, 4 ohms: 400 watts x 2 chan.

Max power output: 1000 watts
MOSFET power supply
Bass Remote Details (Wired remote bass level control included)
LED power indicators
Bass Boost (0-8 dB at 45 Hz)
Bass boost frequency selection (32-64 Hz)
4/3/2 channel operation
Protection temperature (90 C)
Heavy duty aluminum alloy heatsink
RCA level inputs
Screw terminals
Variable high-pass filter (40-500 Hz, 18 dB/octave)
Variable low-pass filter (40-500 Hz, 18 dB/octave)
Subsonic Filter (18 dB at 20 Hz)
CEA-2006 compliant amplifier
Frequency response: 20-20,000 Hz
Input sensitivity: 1.2V-8V
Damping Factor: 80
Dimensions: 12-1/4"L x 10-1/8"W x 2-3/8"H








** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------

Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:

1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.

DO NOT proceed with a deal until you are completely satisfied with the other party.

DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
 

·
Premium Member
Joined
·
730 Posts
Discussion Starter #2
additional pics





 

·
Premium Member
Joined
·
730 Posts
Discussion Starter #3
pms replied to all
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top