DiyMobileAudio.com Car Stereo Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,422 Posts
I would drop sw and midbass drivers to 60Hz, I understand that you want as little overlap as possible, but for mid and high xo I would at least try with flatter filters, and I would try to set xo point between mid and tw higher ...somewhere in 5-6 kHz range......BUT it is hard to give any advice without hearing system first.

Second .. you should try to set your TA/phase as exact as possible, even smal deviations from optimum setting result in lack of microdetails and slightly different timber.
 
1 - 1 of 1 Posts
Top