DiyMobileAudio.com Car Stereo Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I have a pair of Fusion NV 6.5 Comps (2ohm, 80RMS) wired to a 'blankpukt' amp putting 90w at 2ohm.

Supposedly Fusion NV should be the best fusion range but the sound quality isnt as good as the fusion encounter 6.5 comps i had previously! Any ideas why ?

The encounters were being powered by my Alpline iDA-X100 and not the amp. I then upgraded the speakers and later installed the amp. TBH, there is an improvment since i installed the amp but not much! How can i fix this ?

This is my first thread on here so apologise if a similar thing has been discussed but i have searched (i think)!
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #3 ·
Sorry, the normal volume high's to mids are fine!

The mids > lows are where im not happy! The first thing you notice at low volumes is the complete lack of bass. As you turn the volume up, the bass doesnt really increase and distortion very quickly kicks in.
It also seems to be fickle in the succsefulness of the bass reproduction. Listening to certain songs, some of the lower notes come out very well, others dont!

So to reply to 89grands question, the bass response is not good.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top