[iamkickingback]

Why bother? Just tap into the wiring yourself and to hell with the connector. I solder (4% silver) all my speaker connections anyway... If you don;t solder or can;t, splice and crimp.

Taiss Dupont Crimping Tool Kit with 600PCS 2.54mm Dupont Connector Kit SN-28B Ratcheting Wire Crimper Plier,1/2/3/4/5/6/7 Pin Housing Dupont Connector Male Female Pin Header Crimp Terminal AWG28-18 - Amazon.com

Taiss Dupont Crimping Tool Kit with 600PCS 2.54mm Dupont Connector Kit SN-28B Ratcheting Wire Crimper Plier,1/2/3/4/5/6/7 Pin Housing Dupont Connector Male Female Pin Header Crimp Terminal AWG28-18 - Amazon.com

www.amazon.com

 

[iamkickingback]

You don't have too. Your $60,000 car still uses the same $15 connectors. If you do it right, if needed, you save the original and solder them up again if you put the original speakers back in. It was not a sarcastic statement meant to get your garments in a bunch, it's a practical way to address the difficulty in finding a reasonable connector that will work in your $60000 situation. You may be able to duplicate the connections with a kit like that too, just requires a modicum of effort and skill. But hey, just my opinion.

Good luck on your journey!