DiyMobileAudio.com Car Stereo Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter #1
I am fabricating some kick panels for my Subi.

Mids will be placed in these Sealed kick panels.

Mids are the Peerless Exclusives. Here are the specs:

◦Sealed box of 7 liters (0.25cf); F3 of 87Hz



So I need an enclosure with a volume of .25 cf. The enclosure is not square so I figured out volume using water:)

I know there are 7.48 gallons in 1 cubic ft. So just take 7.48 divided by 4 and that will give me how many gallons in .25 cf. right? lol.

So 1.87 gallons of water equals .25 cf.

So, since my enclosure is sealed I will make my kick panels so that I can pour an exact 1.87 gallons into them:)

NOw is this before displacement or after??????????
 

·
Registered
Joined
·
52 Posts
Discussion Starter #2
I am fabricating some kick panels for my Subi.

Mids will be placed in these Sealed kick panels.

Mids are the Peerless Exclusives. Here are the specs:

◦Sealed box of 7 liters (0.25cf); F3 of 87Hz



So I need an enclosure with a volume of .25 cf. The enclosure is not square so I figured out volume using water:)

I know there are 7.48 gallons in 1 cubic ft. So just take 7.48 divided by 4 and that will give me how many gallons in .25 cf. right? lol.

So 1.87 gallons of water equals .25 cf.

So, since my enclosure is sealed I will make my kick panels so that I can pour an exact 1.87 gallons into them:)

NOw is this before displacement or after??????????
 
1 - 2 of 2 Posts
Top