DiyMobileAudio.com Car Stereo Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey guys im new to this whole site but i have a 10in audiobahn special edition sub woofer. well it has 4positives and 4negitives. here's the specs for my amp and the sub also there is a link for the pic of the sub.


# 45 oz. Strontium Magnet
# RMS Power Handling: 300 watts RMS
# Peak Power Handling: 600 watts approx.
# 2" 4-layer ASV Voice Coil
# KM3 Coated for Virtually No Cone Distortion
# Non-Pressed, Non-Transfer Paper Cone
# PHAT Foam Surround
# Non-Pressed, Non-Transfer Paper Cone
# 2 Ohm or 8 Ohm operation per sub (1 ohm, 4 ohm, 16 ohm per pair)
# Lug Lock Terminals

Sub woofer Size 10"
Voice Coil(s) Dual (2 voice coils)
Impedance (per voice coil) 4 ohms
Peak Power Handling 600 watts approx.
RMS Power Handling 300 watts
Woofer Surround Foam
Woofer Composition N/A
Sealed Box Volume 0.75 - 2.0 cubic feet
Ported Box Volume 0.65 - 2.4 cubic feet
Sensitivity 91 dB
Frequency Response 28 - 1000 Hz

Jensen model ps260 2/1 channel amp
power output-
[email protected] ohm(stereo)
[email protected] ohm(bridged)
 

·
Registered
Joined
·
555 Posts
1. Find an online resistance calculator and enter in your sub specs
2. Bring your sub out to your backyard
3. Take pictures of the sub
4. Put it on craigslist and use the money to get an IDQ or DIYMA ;)
 

·
Registered
Joined
·
12,569 Posts
i verticle jig with leeches ... as the fish will be attracted to the chrome on youse audiobling { right over the anchor ;) ]
 
1 - 5 of 5 Posts
Top