DIYMobileAudio.com Car Stereo Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
176 Posts
Discussion Starter · #1 ·
hey guys im new but i just would like to know how this would sound:

ok changed my mind

http://www.madisound.com/cgi-bin/index.cgi?cart_id=4874692.12234&pid=984

these in the kicks around 100 rms to each
bandpassed @ 150 an 3.5k

i just noticed the power rating on that vifa. do you think it would take 100rms crossed at 150hz

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-555

these also in the kicks with around 50rms to each
highpassed at 3k

then to raise the sound stage

http://madisound.com/lpg.html

these on the apiller @ about eye lvl with 50rms to them crossed at 6k or so

how would that sound?
 

· Registered
Joined
·
176 Posts
Discussion Starter · #5 ·
oh cool man i dident know they made a 4ohm ver. i think ill run those and the xt19 like you suggested. tf1216 i cant put those tweets in the pillers cause there just way to big for my jeeps apillers and i just dont like the idea of the tweet and mid being like 2ft apart :( .
 

· Registered
Joined
·
176 Posts
Discussion Starter · #7 ·
10K2HVN said:
you know, the LPG's are pretty good tweets and you could run them with the Seas Lotus RW110 4.5" midranges - if you plan to run the mids to 3.5khz...

what are you planning for midbass..?

Seas L18RNX..? ..G18RNX??
nop im going to buy some elemental designs eu-700 dont know if you guys know abut them but heres the link http://edesignaudio.com/product.php?cid=15&pid=32&cur=USD

there massively beffy (not a word but sounds cool :p ) ima run 1 in each door bandpassed at 63hz 6db oct and 200hz 24db oct. in each door ive got .2 cube sealed boxes so midbass isent going to be an issue :p
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top