Kicker Key 180.4 and 500.1

Willing to package deal
SUBJECT: Kicker Key 180.4

ITEM BRAND & MODEL #: Key 180.4

CONDITION:
9.5/10 used for about 2

PRICE:
$190
SHIPPING:on buyer

ADDITIONAL INFORMATION:

• 4-channel car amplifier/sound processor
• 45 watts RMS x 4 at 4 ohms
• CTA-2006 compliant
• non-bridgeable — minimum impedance of 4 ohms per channel
• Class D amp technology
• KEY Auto Setup customizes the signal for your vehicle
  • calibration mic and activation button included
  • pink noise test tones available from Kicker.com
  • automatic adjustments include 40-band EQ, 24 dB/octave crossover filters, time alignment
• Bi-Amp mode applies tweeter/woofer crossover settings during KEY Auto Setup
• switchable auto compression
• selectable high-pass filters (off, 60, 80, 120 Hz; 24 dB/octave)

Other Features:

• automatic limiter with clip lights
• preamp and speaker-level inputs
  • DC offset sensing turn-on with speaker-level inputs
• Radio-Detect circuit supplies speaker load for receiver to sense
• wiring and hardware not included with amplifier
  • 14- or 12-gauge power and ground leads recommended
• fuse rating: 20A x 1
• dimensions: 7-3/8"W x 1-3/4"H x 2-13/16"
• 
  
  
• SUBJECT:Kicker Key 500.1
  
  ITEM BRAND & MODEL #:
  
  CONDITION: (New / Used - on a scale of 1-10) used 8.75/10 (Some black marks on heat sink)
  
  PRICE:
  $250.00
  SHIPPING: on you
  
  ADDITIONAL INFORMATION:
• 
  
• • mono subwoofer amplifier
    • 150 watts RMS x 1 at 4 ohms
    • 300 watts RMS x 1 at 2 ohms
    • 500 watts RMS x 1 at 1 ohm
  • Class D amp technology
  • KEY Auto Setup customizes the signal for your stereo system
    • test tones available from Kicker.com
    • automatic adjustments include bass restoration and EQ
  • variable low-pass filter (40-160 Hz, 24 dB/octave)
  • variable subsonic filter (10-40 Hz, 24 dB/octave)
• More Info:
  • preamp and speaker-level inputs
    • DC offset sensing turn-on with speaker-level inputs
  • Radio-Detect circuit supplies speaker load for receiver to sense
  • wiring, fuse, and hardware not included with amplifier
    • 8-gauge power and ground leads and a 60-A fuse recommended
  • dimensions: 8-3/16"W x 1-3/4"H x 3-11/16"D