DiyMobileAudio.com Car Stereo Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Need help for sealed enclosure- the sub is new Kicker s15l7 !!!
(2x2 Ohma, powered with PPI 2350 1x1400W -4 Ohms)
Now I'm using the minimum suggested sealed enclosure by Kicker 42.5 litres (1.5 Cubic Feet).
I'm ready to put the sub Kicker s15l7
(2x2 Ohma, powered with PPI 2350 1x1400W -4 Ohms)
into 90 litres ( 3.1783 Cubic Feet) sealed box.
The volume of enclosure is based on test report in Russian magazin AVTOZVUK.
I'm looking for the best SQ result(Not POWER),I mean the type of enclosure is sealed.


If you have any EXPERIENCE or suggestions, please write. 8)
 

·
DIYMA Founder
Joined
·
4,757 Posts
Sorry no experience with that driver, but I would suggest trying to model your car's transfer function before designing the enclosure.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top