DIYMobileAudio.com Car Stereo Forum banner

Mids & Highs and amp question

1K views 1 reply 2 participants last post by  blazeplacid 
#1 ·
Hey guys I am new to the site so any help would be good I picked up the following item from a friend of mine and was going to hook it up in my 97 chevy 1500
1. D662s Diamond Audio components
2. D1300.4 Diamond Audio Amp
3. dkh 110 MB quart 4" rear speakers

I have a couple of questions
first is this amp strong enough to power these components?
second how the heck would I wire this up to be able to run all this off this one amp?
and third is the silk tweeter better sounding then an aluminum tweeter?

any help would be great guys I am really lost. Thanks
 
#2 ·
the components would go to the front two channels on the amp

the 4" would go to the rear two channels on the amp


50 watts per channel is a decent sized amp

I myself would get that amp and only run the components. Bridge the amp and have 150rms each channel to the fronts.

Run the rear off the head unit
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top