[MythosDreamLab]

@ what ohms?

 

[Eatmore Bacon]

@ what ohms?

Sub is [email protected] That’s probably gonna put me at 1200 or better I would presume. I currently have it bridged on a ARC 1200.6 which bridges [email protected] but it’s takes 100% gain on my setup. Trying to get a little headroom. Got a Audison AV Uno 1700 in your pocket by chance?

 

[RickWilson]

I have a near perfect used JL HD750/1 for sale. Rated 750 Watts at 1.5 to 4 ohms. Retails for $1000, selling for $525 obo

Should pair nicely and give you headroom you need. Also a small footprint amp for that output at 4 ohms.

SOLD JL Audio HD750/1 Mono Amp - Used 9.5/10 Condition -...

JL Audio HD750/1 - Monoblock Sub Amp CONDITION: 9.5/10 PRICE: $500 + PP fees ($999 Retail) SHIPPING: Shipped to anywhere in lower 48 states USA, can negotiate if beyond this ADDITIONAL INFORMATION: I bought this amp used from a gentleman on here on DIYMA about a month ago...

www.diymobileaudio.com

If you were willing to wait a few days, I can send my JL bass knob with it too when I swap out my setup this weekend.

 

[miniSQ]

Chances are if you think you need all the gain on your amp to drive that sub, you probably need more sub as well as more power to get where you want to be.

 

[DaveG]

@Cisco473 has/had a JL RD1000 BNIB for a decent price.

 

[Eatmore Bacon]

Chances are if you think you need all the gain on your amp to drive that sub, you probably need more sub as well as more power to get where you want to be.

I hear what your saying but I don't believe this is the case. Or maybe it is? It operates exactly where I want to be but this new Helix DSP with the use of the Conductor has totally changed how my sub acts when compared to the TWK. I like to set my sub gain at 50% of the Conductors range for bass control. With the TWK and its remote bass control the gain was set at about 2/3. With the Helix Conductor at 50% the gain is almost all the way up.
An added plus is I am currently using two ARC XDi 1200.6 amps. One for my tweeters and midrange and the other for mid bass and sub. With a mono for the sub I can move my mid bass to the same amp as the rest of my front stage and have a spare amp. Maybe Im just not thinking this through?

 

[Eatmore Bacon]

I have a near perfect used JL HD750/1 for sale. Rated 750 Watts at 1.5 to 4 ohms. Retails for $1000, selling for $525 obo

Should pair nicely and give you headroom you need. Also a small footprint amp for that output at 4 ohms.

SOLD JL Audio HD750/1 Mono Amp - Used 9.5/10 Condition -...

JL Audio HD750/1 - Monoblock Sub Amp CONDITION: 9.5/10 PRICE: $500 + PP fees ($999 Retail) SHIPPING: Shipped to anywhere in lower 48 states USA, can negotiate if beyond this ADDITIONAL INFORMATION: I bought this amp used from a gentleman on here on DIYMA about a month ago...

www.diymobileaudio.com

If you were willing to wait a few days, I can send my JL bass knob with it too when I swap out my setup this weekend.

Im interested but Im away from home on a job. I need to make a few measurements when I return on Wednesday. Hopefully you still have it when I get back.

 

[Eatmore Bacon]

@Cisco473 has/had a JL RD1000 BNIB for a decent price.

Thanks for the heads up, Dave. I like the profiles of the RD's but was looking for something a little more robust, if you get what Im saying.

 

[RickWilson]

Im interested but Im away from home on a job. I need to make a few measurements when I return on Wednesday. Hopefully you still have it when I get back.

Sounds good, I will PM you

 

[tranv9565]

I have a Helix SPXL1000 if you're interested.

FS: Helix SPXL1000 Amplifier Black

I have an excellent condition Helix SPXL1000 amplifier. Cosmetically I’d say 8/10. A couple minor nicks here and there. Comes with the wooden crate but honestly, don’t expect too much from the crate. It’s thin and already falling apart. One of the best sub amps I’ve used ever. $460 shipped...

www.diymobileaudio.com

 

[Cisco473]

Thanks for the heads up, Dave. I like the profiles of the RD's but was looking for something a little more robust, if you get what Im saying.

I have a 1000/1v2 that’s been refinished from jl back in October. Hasn’t been ran since. Comes with paperwork.


Sent from my iPhone using Tapatalk

 

[Eatmore Bacon]

Sounds good, I will PM you

Just had the amp rack measured. The HD is too wide. That’s a great price though. GLWS

 

[Eatmore Bacon]

I have a 1000/1v2 that’s been refinished from jl back in October. Hasn’t been ran since. Comes with paperwork.


Sent from my iPhone using Tapatalk

Model?

 

[Eatmore Bacon]

Awesome amp but too wide. I can’t go wider than 7”

 

[RickWilson]

Just had the amp rack measured. The HD is too wide. That’s a great price though. GLWS

No worries. Just briefly searched trying to find a mono amp that puts out more than 600w @ 4 ohms that’s 7” or less wide (let alone wiring it) I’m not sure it exists beside an RD1000/1 or a Zapco ST-1650 or 2000 XM. But all those amps are 15”+ long. Not sure your space constraints that way.

 

[azmcrae]

Had this amp for a short while driving some Dynaudio midbasses and power was very good....

Rockville RXD-T2 Micro Car Audio Class D Amplifier 2400w 2 Chan 2x600W CEA Rated (rockvilleaudio.com)

Also there is an amp dyno of it on youtube.

• Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"

 

[Eatmore Bacon]

No worries. Just briefly searched trying to find a mono amp that puts out more than 600w @ 4 ohms that’s 7” or less wide (let alone wiring it) I’m not sure it exists beside an RD1000/1 or a Zapco ST-1650 or 2000 XM. But all those amps are 15”+ long. Not sure your space constraints that way.

Yeah I can deal with it being long. It’s just the width due to mounting limitations on the existing rack. I could make a new rack but that would be a pita

 

[Bsmooth1027]

I have a audison lrx1.1k for $450 shipped if that helps

 

[Cisco473]

Yeah I can deal with it being long. It’s just the width due to mounting limitations on the existing rack. I could make a new rack but that would be a pita

I have a brand new rd 1000/1


Sent from my iPhone using Tapatalk