Morel MM3 or Audiofrog Gb25?

2900 Views 24 Replies 7 Participants Last post by daloudin, 10 mo ago

EHL

Discussion Starter · 11 mo ago

trying to choose between the two mid ranges.

a little background

3 way active front with Morel Elate Carbon. my build currently includes the mm3 but my stock location has a very small opening. They should get them to fit but the speaker grills are very small and prob block 25-30 percent of the speaker and output. Installer wants them in the pillar but i prefer the oem look

Installer proposed the Gb25 instead of the mm3. no issues installing and with such a small foot print the full speaker face should fit in the grill opening

a little ocd on mixing speakers.

do you think the MM3 will still sound good even if a large part of the speaker face is blocked?

Save

1 - 2 of 25 Posts

SWRocket

· #20 · 10 mo ago

This is quite a timely post as I just added a Topping and camera adapter to my cart but trying to understand what other cables are needed and how they're wired.
Is this the correct cable to go from the Camera Adapter to the Topping?
Amazon.com: USB B 3.0 Cable, JSAUX USB-A Male to USB-B 3.0 Male (6.6ft/2M) USB 3.0 Type B Upstream Cord Nylon Braided Compatible with Docking Station, External Hard Drivers, Scanner, Printer and More(Black) : Electronics

Also, for power, do I just use a USB-A to USB-C cable from the car's USB port to the camera adapter?
Amazon.com: Amazon Basics USB Type-C to USB-A Male 3.1 Gen2 Adapter Charger Cable - 3 Feet (0.9 Meters) - Black : Electronics

Save

SWRocket

· #22 · 10 mo ago

Perfect! Thanks so much
Will go with this one instead:
JSAUX Printer Cable, 10ft/3m USB 2.0 Type A to B Male Printer Scanner Cord High Speed Compatible with HP, Canon, Epson, Brother, Lexmark, Dell, Xerox, Samsung and More (Grey) : Amazon.ca: Electronics

Save

Reactions: 1

1 - 2 of 25 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month