DIYMobileAudio.com Car Stereo Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hey I have a Dayton titanic 15 that is currently set up in my house, next year I'll be able to drive and plan on getting a car. So could someone help me model out a box and maybe suggest an amp to use with it. Also I don't know what frequency to tune a box to, right now in my house my box is tuned to 22 hz, I've been told that that's way to low and to have it around 30.
 

· Registered
Joined
·
51 Posts
Start around 4cu and work your way up. the fs is only 24hz so tuning to 30hz is about right, you could try a few hz lower maybe 28hz but you better make sure you have a steep subsonic filter set at 22hz or so.
 

· Registered
Joined
·
2,784 Posts
How big is the current box?

Try your current box if it will fit in a vehicle.

22 hertz is not "too" low. In car, the low end will be good to 15 hertz or so.

IF the box fits and you want an exagerated hump in the ~30 hertz range, take styrofoam blocks and add to the enclosure to reduce volume and raise tuning.

OR build a new box.:D
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top