DiyMobileAudio.com Car Stereo Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
606 Posts
Discussion Starter #1
I took pity on an obviously unloved sub box in a pawnshop yesterday and brought it home. It is loaded with two Orion Cobalt 10 subs. I have been searching the net for specs, but not getting very far. I have seen pictures that look similar, but no specs. DEI's site seems to only show later model subs and I assume that these are fairly old. I'm wondering if anyone has an old manual laying around with the specs, or can perhaps point me to another sub that is the same - these do sort of look like generic cheap subs.

Description:

-Model # CO10 (only marking on the things other than a serial number barcode)
-single 4 ohm VC
-black treated paper cone
-stamped steel frame
-some sort of dense rubbery surround
-single stack magnet
-large pole vent -3/4 inches or so

They are in a sealed box with about .7 cuft each, but who knows, it may have been built to fit a certain space rather than to be a happy size for the drivers.

TIA for any possible help.
 

·
Registered
Joined
·
606 Posts
Discussion Starter #3
Thanks, I had not found that one. Certainly what I'm hearing is similar to what unibox models from those numbers.
 
1 - 3 of 3 Posts
Top