[Greg_Canada]

Hey everyone, got some stuff for sale,
lets start off with the nicest one,

Precision Power PPI ProMos25

2 x 25W @ 4 ohms
2 x 50W @ 2 ohms
2 x 100W @ 1 ohm
1 x 100W @ 4 ohms bridge
1 x 200W @ 2 ohms bridge
and it's 1.5 ohm stable (mono)
Remember, these power numbers are at 12V (shouldn't need to explain!)

Worked great last time it was in the truck.

Power wires are alittle short, but workable. Has it's scratches but still looks good.

Price, BO.

 

[Greg_Canada]

Next is some Orion board, maybe from a 275sx? Don't know, but if it will work for you, great,

Condition : Parts.
Price, BO.

 

[Greg_Canada]

Next up, a
G&S Designs GX3 Electronic 3-way Crossover. One issue, there is a wire inside for the remote turn on, that has cracked off the board. I tried to fix it but my solder didnt hold. For anyone with experience it will take longer to pop the knobs off and unscrew the screws than it will to fix the wire. It worked fine until my solder broke.

Price $15

 

[Greg_Canada]

Oops double post.

 

[Mless5]

How much for crossover shipped to 01907? Can it bandpass?

Thanks

 

[Greg_Canada]

Next, a Rockford Fosgate Punch 75 HD (Hybrid Design)

I have never plugged this one in, so i can't guarantee that it works or not. I see no burn marks or anything inside, however.
The speaker wire plug fits fine, but it is from another amp so you will probably have to move the wires around.
It's missing the screws that hold the cover down.

Info from ampguts:
Output Power at 12V:
2 x 37.5W @ 4 ohms (0.05% THD+N - 20Hz to 20KHz)
2 x 60W @ 4 ohms (10% THD+N - 1KHz)
2 x 60W @ 2 ohms (0.1% THD+N - 20Hz to 20KHz)
1 x 120W @ 4 ohms bridged
S/N Ratio: over 80dB, unweighted.
Fuse: External 15A (supplied), 20A for extreme load.
Dimensions: 7.6" x 8.6" x 2.2" (19.3cm x 21.8cm x 5.6cm)
Manufactured in 1989-1993


Price, BO

 

[Greg_Canada]

last but not least, a Blaupunkt Dallas CR85. There was a sticker on top that said "replaced volume down switch". It has been sitting in the shop for, o i'd say 5-10 years.

It's 4x20 rms, the faceplate is removable and it's tape deck only. Front and rear preouts. The trim ring has been broken off but can be superglued back on. Includes the faceplate case.

Is $20 fair?

 

[Greg_Canada]

How much for crossover shipped to 01907? Can it bandpass?

Thanks

It can bandpass the second input. Click the main picture and maybe you can make it out.
What is your preferred shipper?

Greg

 

[Mless5]

The cheapest please, no rush at all.

Thanks.

 

[ECM]

I'm interested in the Punch 75 and the orion PCB. How much is shipping to 09836 the cheapest way?

BTW It's not a 275sx board. It's older, maybe first gen 280.

Thanks
ECM

 

[slowsedan01]

Too bad the Blau isn't changer ready!!!

 

[Greg_Canada]

The cheapest please, no rush at all.

Thanks.

Shipping is $15 US via Canada Post/ USPS ground.

Greg

 

[Greg_Canada]

I'm interested in the Punch 75 and the orion PCB. How much is shipping to 09836 the cheapest way?

BTW It's not a 275sx board. It's older, maybe first gen 280.

Thanks
ECM

Bout $20 US for shipping via Canada Post / USPS

 

[ChrisB]

Next is some Orion board, maybe from a 275sx? Don't know, but if it will work for you, great,

Condition : Parts.
Price, BO.

BTW It's not a 275sx board. It's older, maybe first gen 280.

Looks like a Generation 1 Orion 280 GX board:

 

[Greg_Canada]

Thanks for the info dude.