Thank you for viewing my posting.
I have 3 amazing hi-end car amplifiers for sale.
2- Phass amps from Japan 1- Tube 4ch and 1- 2ch
1- BNIB Audison Monoblock amp
My asking prices are as follows:
1. Phass TP-4100 Tube 4ch Amp - asking $1825+ fees shipped
Specs:
Power output 14.4V/4ohm 100W x 4
1KHz at THD 14.4V/2 ohm 130W x 4
Frequency response: 2 - 80KHz
S/N ration: >90dB
Stereo separation: 75dB
Idle current: 2.0A
Remote voltage: 10 - 17V
Input impedance: 20Kohm
Input sensitivity: 0.2 - 4V
Crossover frequency (HP): 50 - 200Hz
Fuse type: 15A x 4
Dimension (WxHxL, mm): 452 x 200 x 59
Made in Japan
2. Phass AP-225i asking $225+fees shipped
Specs:
・ 4Ω (12.5V), rated output / maximum output 25W x 2 / W x 2
・ 2Ω (12.5V) Rated output / maximum output W x 2 / W x 2
・ 4Ω Bridge (13.8V), rated output / maximum Output W x 2 / W x 2
・ Frequency characteristics 10Hz-80KHz
・ Input sensitivity 0.2V ~ 4V
・ Crossover (Hi) Hz-Hz
・ Crossover (Lo) Hz-Hz
・ S / N ratio 100dB or more
・ Harmonic distortion Rate (THD) 0.05% or less
・ Size 135mm x 56mm x 225mm
3. Audison SR1D Monoblock - Asking $ 325+fees shipped. This is Brand NEW in the box.
No Trades and Cash only. Shipping to USA only.
I have 3 amazing hi-end car amplifiers for sale.
2- Phass amps from Japan 1- Tube 4ch and 1- 2ch
1- BNIB Audison Monoblock amp
My asking prices are as follows:
1. Phass TP-4100 Tube 4ch Amp - asking $1825+ fees shipped
Specs:
Power output 14.4V/4ohm 100W x 4
1KHz at THD 14.4V/2 ohm 130W x 4
Frequency response: 2 - 80KHz
S/N ration: >90dB
Stereo separation: 75dB
Idle current: 2.0A
Remote voltage: 10 - 17V
Input impedance: 20Kohm
Input sensitivity: 0.2 - 4V
Crossover frequency (HP): 50 - 200Hz
Fuse type: 15A x 4
Dimension (WxHxL, mm): 452 x 200 x 59
Made in Japan
2. Phass AP-225i asking $225+fees shipped
Specs:
・ 4Ω (12.5V), rated output / maximum output 25W x 2 / W x 2
・ 2Ω (12.5V) Rated output / maximum output W x 2 / W x 2
・ 4Ω Bridge (13.8V), rated output / maximum Output W x 2 / W x 2
・ Frequency characteristics 10Hz-80KHz
・ Input sensitivity 0.2V ~ 4V
・ Crossover (Hi) Hz-Hz
・ Crossover (Lo) Hz-Hz
・ S / N ratio 100dB or more
・ Harmonic distortion Rate (THD) 0.05% or less
・ Size 135mm x 56mm x 225mm
3. Audison SR1D Monoblock - Asking $ 325+fees shipped. This is Brand NEW in the box.
- Nominal power (RMS) @12 VDC; 1% THD :
- 4 Ch @ 4 Ω 200 W x 1
- Output power (RMS) @14.4 VDC; 1% THD:
- 1 Ch @ 4 Ω 280 W x 1
- 1 Ch @ 2 Ω 460 W x 1
- 1 Ch @ 1 Ω 640 W x 1
- Dimensions WxHxD (inches): 8”7/16 x 2”1/8 x 11”3/8
- PRE-OUT pass-through from high level SPEAKERS-IN input
- Removable panel to hide and protect controls
- Monoblock aluminium heatsink construction
- Fanless convection cooling system
- Strip fuse located on the control panel for easy replacement
- Connections: Power supply terminals accepts 7 mm diameter (4 AWG) cable, Speaker terminals accepts 4.5 mm diameter (8 AWG) cables, Hi Level speaker and remote turn-on terminals equipped with removable connectors with screw fastening
- “D” class topology, delivering 280W at 4 ohms and 640W power at 1 ohm
- Phase control switch
- Selectable Subsonic Filter
- Bass Boost Filter
- Continuosly adjustable LO-pass 24dB
- Power supply voltage: 11÷15 VDC
- Idling current: 1 A
- Switched off: <0.01 mA
- Remote IN voltage: 7÷15 VDC (1 mA)
- Remote OUT voltage: 11÷15 VDC (15 mA)
- Internal fuse (AFS): 40 A
- Consumption @ 14.4 VDC, 1 Ω,
- Max Musical Power: 33 A
- Distortion - THD (100 Hz @ 4 Ω): 0.3 %
- Bandwidth (-3 dB): 18 ÷ 500 Hz
- S/N ratio (A weighted, 1 V): 90 dB
- Damping factor (100 Hz @ 4 Ω): 150
- Input sensitivity (PRE IN): 0.3 ÷ 5 VRMS
- Input sensitivity (Speaker In): 1 ÷ 15 VRMS
- Input impedance (PRE IN): 15 kΩ
- Input impedance (Speaker In): 100 Ω
- Load impedance (Min):
- 1 Ch 1 Ω
- Inputs Pre IN / Speaker IN
- Output Pre
- Filter LO-pass: 50 ÷ 500 Hz @ 24 dB/oct
- Subsonic 25 Hz @ 24 dB/oct
- Boost + 6 dB; + 3 dB; OFF / @ 45 Hz
- Phase Control 0° - 180°
No Trades and Cash only. Shipping to USA only.