DiyMobileAudio.com Car Stereo Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
654 Posts
Discussion Starter #1
I'm trying to connect the line out from my Delphi Skyfi2 to the "AUX" input on my 9887, but for some reason, I'm not getting anything through the head unit. I'm using the Ai-net connectoer that plugs into the back of the 9887, and a mini jack to RCA adapter that connects between the Delphi and the Ai-net connector. And I've made sure the aux function on the HU is turned on. Any ideas?
 

·
Registered
Joined
·
1,383 Posts
If the 9887 has a switch on the side marked "EQ/Div Norm" make sure the switch is toward Norm.
 

·
Registered
Joined
·
654 Posts
Discussion Starter #4
that, and be certain that the sat has output, try an ipod thru it or something?
I plugged a set of headphones into the line out jack on the Delphi and they worked, so I know the signal is there. It's either not getting to the Alpine, or the Alpine isn't processing it.
 

·
Registered
Joined
·
34 Posts
press and hold function button (where the number buttons are) and its in the settings you have to turn the AUX option on
 
1 - 6 of 6 Posts
Top