DIYMobileAudio.com Car Stereo Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 · (Edited)
I am getting a Lexus NX with the base 10 speaker Pioneer system in the near future.
It has a 4" coherent source transducer.
I am not going to alter the A pillar or stick tweeters onto the dash
What is needed to put in a tweeter in this 4" spot other than a bracket to hold the tweeter?
Some Dynamat in that location?
Tweeter will be one of the following: Audiofrog GB15, Dynaudio MD102 and Scan-Speak D3004/6040-05.
 

· Registered
Joined
·
740 Posts
Are you running just the tweeter in that spot, or trying to make a braxial type setup?

It is sometimes better to keep the tweeter further from the windshield rather than closer. Depends on crossover of the tweeter and windshield geometry but worth taking some measurements.
 

· Banned
Joined
·
24,246 Posts
Definitely do not use just a tweeter when you have the opportunity to use a wideband or coaxial. Going 2-way vs these other options would be a huge mistake.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top