REW House curve not showing properly

Toowonphyve · Apr 7, 2019

SO I've tried with some different .txt files loaded into the House Curve Preferences of REW, but they all just look the same in the EQ window…Completely flat with a roll off at 20hz. I opened the txt file and sure enough the data is there. The "House Curve Target" is checked beneath the graph (allowing me to see the flat house curve).
Am I missing something? Any ideas? Thank You!

Adrock · Apr 8, 2019

Hmmmmmm. I use .CSV file.

Anyway, don't put the curve in under preferences. Click on file, then import, then import house curve (I think that's what it is, I'm going off memory), then select the file. This should show up in both the main screen and the RTA screen. Just make sure you have it selected at the bottom. If you save the current averages the house curve will disappear from the RTA screen. You need to go back to the main screen and then select the house curve on the left. This will put the curve back in the RTA screen to measure to.

See if that works for the text file.

gbrnole · Apr 8, 2019

Justin Zazzi made a tool to create CSV files to import house curves into REW.

The tool can be downloaded from the link below - it's in his signature

https://www.diymobileaudio.com/forum/3535305-post8.html

REW House curve not showing properly

Attachments

Top Contributors this Month

Recommended Communities