DiyMobileAudio.com Car Stereo Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
806 Posts
Discussion Starter #1

·
Registered
Joined
·
862 Posts
The outputs sections of those are glued on, not clamped on. Not sure if how you would get those back on.

Juan
 

·
Moderator
Joined
·
2,510 Posts
The outputs sections of those are glued on, not clamped on. Not sure if how you would get those back on.

Juan
The transistors are soldered to small pcb's and those are screwed to the heatsink. From the picture in the auction it looks like they're already soldered so all you would have to do is unscrew the old board, clean the heatsink and apply new thermal paste and screw the new board in.
 

·
Registered
Joined
·
862 Posts
The transistors are soldered to small pcb's and those are screwed to the heatsink. From the picture in the auction it looks like they're already soldered so all you would have to do is unscrew the old board, clean the heatsink and apply new thermal paste and screw the new board in.
You mean these:



Been there, those boards I'm pretty sure aren't screwed on.

Juan
 
1 - 5 of 5 Posts
Top