DIYMobileAudio.com Car Stereo Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
440 Posts
the first thing i would TRY with those components would be..

Tweeters @ 4khz -12db/oct

Mids @ 2khz -12db/oct - then move the xover point up till they sound good. then somehow, if the mids end up xovered above 3.5khz and start to sound bad, then try a steeper slope or/and move the tweeter down.. but if the mids sound good xovered high, then try moving the tweeter higher..

Then when you think, everything sounds perfect. Save the settings and start all over again with different slopes and xover points! :twisted:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top