Car Stereo Forum banner

stacking x/overs

812 Views 1 Reply 2 Participants Last post by  npdang
can anyone tell me how you figure out freq/slope if using more than one crossover?ie:if using 2 18db/oct filters at 100 hz,(both low pass)what freq/slope would you end up with?

1 - 2 of 2 Posts
36db at 100hz. The q of the filter may change though.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.