DiyMobileAudio.com Car Stereo Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,752 Posts
You can run the amp at 8 ohms bridged, you just won't get as much power out of the amp. For maximum power, use a single 4 ohm or dual 2 ohm. A dual 4 ohm wired in series for 8 ohms would work but power output would be lower, equal to twice the 4ohm stereo output.
 

·
Registered
Joined
·
5,752 Posts
That's not a lot of power to work with really. Ideally a ported enclosure would be your best best. Something fairly efficient too. I'd say maybe a JBL GTO 10 ported would have decent output. If a 12 is pushing it sealed, you aren't getting one ported in there so I'd say use a 10. The JBL's are nice subs, cheap as hell on ebay too.

You could always buy my PDX-1.600 I have for sale fairly cheap and you can run 600 watts at 2 or 4 ohms (SHAMELESS PLUG I KNOW)!:)
 
1 - 2 of 2 Posts
Top