DIYMobileAudio.com Car Stereo Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a question about tweeters. I'm new to all this and dont have alot of funds. I drive a 04 Ford Crown Vic P71. I put a Kenwood DDX376BT head unit in. I put my old MTX 12 inch Terminators with the MTX 800w amp to power them. I have a Cerwin Vega 4 channel amp that isnt hooked up yet that I want to use to power the four 6x8 infinity R series speakers. They match the RMS of the amp. I also have a 2.5 Fared cap as well. My question is: I would like to add 2 kicker tweeters 75w RMS to my system. Would I need another 2 channel amp or is there another RIGHT way to do this? Please help. And thank you fpr your time.
 

· Registered
Joined
·
754 Posts
Sub Amp to power your Subs, even if you Bridged the amp to run Subs, you would only have 1 output for 2 tweets, and that ain't gonna work.
4 Channel Amp to power your four(4) 6x8 R series speakers. You can not run an extra 2 speakers (tweets) on the four channel Amp because all the outputs are being used, so if you hooked up the tweets to that amp, and try to share outputs, you WILL have major problems.

Only option is to add a 2 channel Amp, or 4 channel Amp an have 2 extra outputs for future use.....

Or don't use 2 of the 6X8 speakers, and use the outputs for your tweets.
 

· Premium Member
Joined
·
7,703 Posts
....
...My question is: I would like to add 2 kicker tweeters 75w RMS to my system. Would I need another 2 channel amp or is there another RIGHT way to do this? Please help. And thank you fpr your time.
Or run the tweeters off a smaller amp or off of the HU if it has a couple of powered channels and crossover/TA?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top