DIYMobileAudio.com Car Stereo Forum banner
1 - 1 of 9 Posts

· Registered
Joined
·
496 Posts
If you bought a standard harness it will have the accessory power wire (red), but that wire isn't present on the car harness. You just need to run that wire to a power source that turns on/off with the ignition. Dodge usually has at least one power outlet that will work.
 
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top