DIYMobileAudio.com Car Stereo Forum banner

WTB: Mono sub amp - 500W or so

904 Views 10 Replies 7 Participants Last post by  JAX
Budget is $150 - what have you got??

Thx.
1 - 11 of 11 Posts
just what you need...with the batcap 400 i use on it I get 14 volts constant and it pounds..the digital controls are nice and easy to work also

http://www.diymobileaudio.com/forum...t-class-d-sub-amp-mrd-605-w-batcap-400-a.html
Budget is $150 - what have you got??

Thx.
Not sure if you could use a powerful 2 channel amp but I have a Rockford P650.2

175x2
650x1
Those are the rated stats but I've seen birth sheets of over 800x1

It's in good condition 9/10. Just no bass knob, and I would take $150 shipped plus paypal for this.



See less See more
2
I sold my Alpine...but Skyllar is a good guy and he sells good stuff..I just bought a good amp from him and its working nicely..thanks
I sold my Alpine...but Skyllar is a good guy and he sells good stuff..I just bought a good amp from him and its working nicely..thanks
Thanks for the kind words Mike, I'm glad you like it.
I have a JBL GTS600, 600wrms

Power output at 14.4V (20Hz – 20kHz):
2 x 200W @ 4 Ohms (0.05% THD)
2 x 300W @ 2 Ohms (0.08% THD)
1 x 600W @ 4 ohms bridged (0.08% THD)
Fuse: 2 x 40A

I can do $85 shipped.

JBL GTS600
See less See more
I got a phoenix gold zx400ti.it is a 2 channel,but can be bridged and great amp.I can do $110 shipped.lmk
I have this: Alpine MRP-M650 class D mono amp
Class D mono subwoofer car amplifier
400 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
Variable low-pass filter (50-200 Hz, 24 dB/octave)
Tuned Bass EQ (0-12 dB bass boost at 50 Hz)
Subsonic filter (24 dB at 15 Hz)
MOSFET power supply
CEA-2006 compliant
STAR Topology (minimizes internal noise and prevents ground interference)
Speaker- and preamp-level inputs
Gold-plated screw terminals
Fuse rating: 30A x 2
12-13/16"W x 2-3/8"H x 9-9/16"D
I bought new at a local shop (Dedona) and used about 4 months. Been sitting in my condo since.
$150 shipped or are you close to me in NC? Maybe we can avoid the shipping part?

Jman
See less See more
I have this: Alpine MRP-M650 class D mono amp
Class D mono subwoofer car amplifier
400 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
Variable low-pass filter (50-200 Hz, 24 dB/octave)
Tuned Bass EQ (0-12 dB bass boost at 50 Hz)
Subsonic filter (24 dB at 15 Hz)
MOSFET power supply
CEA-2006 compliant
STAR Topology (minimizes internal noise and prevents ground interference)
Speaker- and preamp-level inputs
Gold-plated screw terminals
Fuse rating: 30A x 2
12-13/16"W x 2-3/8"H x 9-9/16"D
I bought new at a local shop (Dedona) and used about 4 months. Been sitting in my condo since.
$150 shipped or are you close to me in NC? Maybe we can avoid the shipping part?

Jman
same model amp I just sold last week that you missed and I included a batcap...

that amp works well though....worth a look...
1 - 11 of 11 Posts
Top