DIYMobileAudio.com Car Stereo Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
5,754 Posts
I want everything that comes in box with the head unit
Okay, thanks. Just for reference, here is what is included in the box with a brand new unit:

  • AM/FM/CD Dash Mount Stereo Unit
  • Detachable Faceplate
  • Hard faceplate case
  • Trim ring
  • Mounting Sleeve/Cage
  • Wiring harness with attached ferrite noise filter
  • RM-X90 wired rotary remote
  • RM-X9 wireless IR remote with mounting bracket/holder (requires two "AA' batteries - batteries not included)
  • "E-mount" side brackets
  • Backstrap
  • 1 self-tapping screw and 1 machine screw for backstrap
  • 3/4" x 1-1/2" piece of double-sided tape (for mounting wireless remote bracket)
  • 4 ISO-mount screws
  • 2 self-tapping screws (for mounting base of wired remote)
  • Digital output bracket with M3 machine screw
  • Operating instructions manual
  • Installation/connections manual
  • Warranty sheet.

The XA-D210 or XA-D211 Digital Optical Toslink Adapter is sold separately. I have 1 extra available.

I'll see if any of my 4 extra used CDX-C90's qualify as MINT condition, but I do not have the original Box, the small mounting bracket/holder for the wireless IR RM-X9 candy bar remote, the original small mounting Screws for the Rotary Remote Base, digital output adapter Bracket & screw, or the backstrap/backstrap screws...all of which are non-essential for operation.
 

· Registered
Joined
·
106 Posts
One thing I did find out about this head unit Display gets very dark over time.
And when it does it is currently not repairable. The EL strip goes bad and there is not a replacement part,
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top