[cman]

Looking for morel nano MM2 midrange for rear fill. It is the only driver i can fit due to depth requirements (I mounted my amps upside down under my rear trunk deck blocking the stock 6x9 holes). Used preferrably, i see a guy selling them on ebay for $200 but thats just a bit more than im looking to pay for real fill.

Total depth I have to work with is 30, maybe 35mm (total not mounting depth) so i am open to other options but i do not believe anything else exists like them.



Thanks

 

[MythosDreamLab]

Would these work?

https://www.audison.eu/wp-content/uploads/2021/04/AUDISON_AP-2-MV_Tech-Sheet_rev20A.pdf

Or 6mm over (make a spacer):

https://www.audison.eu/wp-content/uploads/2017/07/AUDISON_Prima_APX4_Tech_Sheet.pdf

 

[cman]

The AP2 is super close. It’s the same depth as a morel CCWR254 which I actually have on hand… and they are just barely touching… like not quite touching but if I snap the clips down on the plastic trim then it will be touching the speakers surround from my calculations…

a spacer is not an option…unfortunately