Joined
·
5,225 Posts
Product Brand & Model: Zed Audio - Lev III (Brand New)
Condition of all items: Brand New
Total Price: : $825.00
Shipping Terms: : Including in price.
Pictures: See Attached
Additional info:
This amplifier is brand new. Never hooked up or etc. I purchased one to many of these amplifiers and I need sell one of them. Here is some factory information about it.
Rated power is 190 watts x 6 into 4 ohm or 300w x 6 into 2 ohm.
Bridged power is 380w x 3 into 8 ohm or 600w x 3 into 4 ohm.
The 3 pairs of channels are independently bridgeable.
Two, four or six input configuration.
Channels 1+2 feature a 24dB per octave Linkwitz Riley High crossover.
Channels 1+2 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass or Low Pass from channels 5+6.
Channels 3+4 feature 24dB per octave Linkwitz Riley High and Low Pass crossovers.
Channels 3+4 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass, Low Pass or Bandpass or Low Pass from channels 5+6. .
Channels 5+6 feature feature 24dB per octave Linkwitz Riley High and Low Pass crossovers.
Channels 5+6 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass, Low Pass or Bandpass.
The High Pass crossover doubles as a subsonic filter as it is able to respond down to 10Hz.
LEVIATHAN Is well suited to running a multitude of different systems from simple 4 satellite/sub woofer type to tri and quad amped systems. Level controls accommodate input levels up to 8.6v RMS. Pre-amplifiers utilize a fully isolated power supply for zero ground loops. Pre-amplifiers drive the main amplifiers in a fully balanced mode. Class D amplifiers utilize high-speed high current low gate charge MOSFETs. Fully regulated power supply delivers power independent of battery voltage. There are a total of seventeen regulated power supplies. The power supply utilizes twelve 110 amp MOSFETs in a source follower configuration for maximum bandwidth. Low ESR 105°C capacitors are used in the power supply. Very high efficiency owing to the smart power supply. Tiffany RCA's with Teflon inserts are used for ultimate quality and reliability. Made in the USA
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recommend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
Condition of all items: Brand New
Total Price: : $825.00
Shipping Terms: : Including in price.
Pictures: See Attached
Additional info:
This amplifier is brand new. Never hooked up or etc. I purchased one to many of these amplifiers and I need sell one of them. Here is some factory information about it.
Rated power is 190 watts x 6 into 4 ohm or 300w x 6 into 2 ohm.
Bridged power is 380w x 3 into 8 ohm or 600w x 3 into 4 ohm.
The 3 pairs of channels are independently bridgeable.
Two, four or six input configuration.
Channels 1+2 feature a 24dB per octave Linkwitz Riley High crossover.
Channels 1+2 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass or Low Pass from channels 5+6.
Channels 3+4 feature 24dB per octave Linkwitz Riley High and Low Pass crossovers.
Channels 3+4 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass, Low Pass or Bandpass or Low Pass from channels 5+6. .
Channels 5+6 feature feature 24dB per octave Linkwitz Riley High and Low Pass crossovers.
Channels 5+6 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass, Low Pass or Bandpass.
The High Pass crossover doubles as a subsonic filter as it is able to respond down to 10Hz.
LEVIATHAN Is well suited to running a multitude of different systems from simple 4 satellite/sub woofer type to tri and quad amped systems. Level controls accommodate input levels up to 8.6v RMS. Pre-amplifiers utilize a fully isolated power supply for zero ground loops. Pre-amplifiers drive the main amplifiers in a fully balanced mode. Class D amplifiers utilize high-speed high current low gate charge MOSFETs. Fully regulated power supply delivers power independent of battery voltage. There are a total of seventeen regulated power supplies. The power supply utilizes twelve 110 amp MOSFETs in a source follower configuration for maximum bandwidth. Low ESR 105°C capacitors are used in the power supply. Very high efficiency owing to the smart power supply. Tiffany RCA's with Teflon inserts are used for ultimate quality and reliability. Made in the USA
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recommend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
). GLWS.
