I posted this up on the CA.com forums and thought this may be a better place for feedback on my project....
I've been wanting to build my own boombox for about 20 years, so I recently decided to hack my trusty Rubbermaid 21" Plastic toolbox into a portable car stereo "boombox".
Here are the components I used:
Source - Alpine CDA-9813 CD/MP3/WMA (with V-Drive high power built-in amplifier)
Sound - MB Quart FKA116 - 6.5" 2-way (not my 1st choice, but had them already)
Power - 12v 11ah sealed lead acid battery (around $30 from eBay)
Extras - 12v lighted switch, analog 12v meter, binding post speaker terminals, 20A fuse with 12ga power/ground wire, dual RCA bulkhead connectors, vinyl sound deadening material, marine wire antenna and more...
The first video I created shows the individual components of the build. The seconds video shows the build process and gives a sound demo of the (semi-completed) unit.
I've also constructed a subwoofer addon, but went a little overboard on my design. I'll post more information soon....
Feedback, good, bad or neutral is appreciated!
Part 1: The Components
YouTube - Custom Toolbox Boombox V2.0 - Portable Car Stereo Ghettoblaster! - Part 1
Part 2: The Build
YouTube - Custom Toolbox Boombox V2.0 - Portable Car Stereo Ghettoblaster! - Part 2
.....
I've been wanting to build my own boombox for about 20 years, so I recently decided to hack my trusty Rubbermaid 21" Plastic toolbox into a portable car stereo "boombox".
Here are the components I used:
Source - Alpine CDA-9813 CD/MP3/WMA (with V-Drive high power built-in amplifier)
Sound - MB Quart FKA116 - 6.5" 2-way (not my 1st choice, but had them already)
Power - 12v 11ah sealed lead acid battery (around $30 from eBay)
Extras - 12v lighted switch, analog 12v meter, binding post speaker terminals, 20A fuse with 12ga power/ground wire, dual RCA bulkhead connectors, vinyl sound deadening material, marine wire antenna and more...
The first video I created shows the individual components of the build. The seconds video shows the build process and gives a sound demo of the (semi-completed) unit.
I've also constructed a subwoofer addon, but went a little overboard on my design. I'll post more information soon....
Feedback, good, bad or neutral is appreciated!
Part 1: The Components
YouTube - Custom Toolbox Boombox V2.0 - Portable Car Stereo Ghettoblaster! - Part 1
Part 2: The Build
YouTube - Custom Toolbox Boombox V2.0 - Portable Car Stereo Ghettoblaster! - Part 2
.....
