yeah theyre fine. bit pricey, but theyre fine

 

Stinger 4000 RCAs are my go to... tiny ends and very flexible, which tends to be crucial.

As for speaker wire, if you find cheaper, true AWG copper wire elsewhere, it'll be fine.

 

I have full stinger wire in my car, power and RCA's. It's a great product ! There are less expensive brands that deliver the same quality. Get to know your local stinger dealer, he might be able to give you a competitive price point.

 

Knuconceptz/thread

 

ehh, a lot of people have been having bad luck with their rca's

 

Yes, is good but the gauge have less strands than other brands. They called the other brands "overbuilt".

 

id prefer something thats actually true to size than something thats oversized when it comes to wire. it gets extremely inconvenient with some terminals and distribution blocks.

 

I think stinger is a great product and one of the few companies that still make distro blocks that look good.

as far as wiring goes nothing wrong with using welding wire. Less than $2 per ft and as advertised.

 

I know plenty of people running stinger RCAs in both SPL and SQ
I know a very high held competitor that using them, not going to mention any names though.

 

That means Nothing! The brand is good i work with and have the old expert line, but the truth still the truth no matter if I'm the minority.

 

Im going to leave this here....

 

How many of those you want? I can sell you Stinger 9000.
The borregomatrix is everywhere!

 

I have all that I need, thank you very much.
I have 5 sets of these in my car.

 

Congratulations to the seller! Now ask them why you don't have the same serie 9000 speaker wire. You have a great input interconnector, now you need a great output speaker wire?

 

this thread went downhill so god damn fast lol

 

....kinda like a bungee jump

 

But I do have great speaker wire.... all Stinger pro series.
Anything else I can help you with???

 

I thought it was HPM!
Yes, help to fight the NWO and all the zombies.

 

???????? WTF ???????
what do you think the "P" stands for in "HPM"?
it stands for "pro"
???????
The HPM wires are a part of the PRO series.
The actual PRO wires are a step down from the HPM's

Here' a good question? have you tried to switch to 'decaf' for coffee?

 

That's not a question! That is ignorance.

 

guys.. its wire. jesus christ

 

LOLOLOLOLOLOLOL

 

So many other opinions. This is what happens when someone asks a personal opinion thread, people will reply, and others will argue why that opinion sucks. It's the nature of the question

 

I have a fe of the 17 or 21 feel 4000 series that Bing normally use. I figured if it's good for him it will be more than enough for me. However, after a few connect/disconnect, the ends are very loose. I like the fact that they are very flexible and require very little space to run. I'll cut off the ends and attempt to solder some different ends and see how it will work.

 

http://i39.photobucket.com/albums/e179/doctflame/spiderman-meme-generator-****-sorry-thought-this-was-a-spiderman-thread-215725_zps9dmdiiuf.png

 

I just use tspec everything, it all looks great and works great!

 

And the only ****ty wire is... ****ty wire.
once you go above a certain point you will get diminishing returns as far as price to performance goes. and once you are at the point, most people just have it aesthetics.

 

exactly.

Reason I run stinger is because I did actually get a good deal on it(cheaper than welding at the time) and it looks damn good. Now if I had to pay $5 per foot of stinger 1/0 I would just buy welding for like 1.85 per foot and some 3/4" techflex for hella cheap and save a metric **** ton of money.

If I end up adding a second battery under the hood of my car I will probably just end up ordering welding wire and doing techflex.

20ft welding wire at $1.85ft $37 +$12 for techflex
20ft stinger at $5ft $100

Now if we are talking cca then yes its **** but I don't think stinger makes any cca do they?


But to answer the simple question of whether stinger is still a good brand.

Yes they are still a good brand

 

Jesus, I just wanted to know if Stinger was still any good or if their quality had gone way down hill. All I wanted to know was if a SI4617 6 channel RCA wire was going to be good enough to go between my head unit and my amp. It's a $22 cable on Amazon.

Haven't seen this much wire fire since my buddy turned over 2 PPI tube driver amps to Audio Express.

 

Not your fault
Its just that Some people dont understand intelligent satire all the time, and some people just like de-railing threads and trying to piss people off.

 

Religion is faith in the unseen. This is not the subject at hand here this afternoon.
Stinger makes great products.... im not saying they are the "best", if I said that they are the best, then that would be an objective statement.
If you can get these products at a good price, then go forth with confidence.
With careful shopping, you can get some amazing deals on equipment now a days.

Welding cable is always a great alternative when looking for power cable, high strand count, flexible, and inexpensive!!!

 

You will never understand! But don't worry, too many people in this world are progam to the same concept. Do you know the real meaning of understanding?

 

This thread is full of ****

Sent from my SM-G920V using Tapatalk

 

I really want to use that as my sig...

 

Good brand, OFC power tin or nickel plated copper wire may have 30 micro strands less than other good car wire brands.