how firm will the modeling clay get? i just read over on ECA that when hot it can drip :?: is it similar to play-do?

 

cool article.... i was just going to make a thread on eca about where to get modeling clay but i guess i'll ask here. why use non hardening as opposed to hardening?

 

It does get soft and putty like when hot, but these pics you see have been in my car for over a year and a half. I couldn't imagine it getting hot enough to drip.

You can buy non-hardening clay at any arts and crafts store. I think the hardening kind gets dry and brittle which is why you want the non-hardening.

 

well i was planning on laying a coat of liquid deadener on top of them anyways so that shouldnt be a problem i dont htink. thanks

 

modeling clay...

Once you scew the speaker down doesn't all the clay just squish out anyway??

I agree on the deflex pads...they made a huge difference in my doors. My doors get water in them so I decided not to go with the foam.

 

npdang,

when you used expanding foam for your trunk, did you use hard-drying (cracks and holes) or soft-drying foam (window frame)..?

 

The clay does squish out when you screw it down, that's why you don't screw it down all the way I like to leave 3-5mm of clay on each side of the mdf baffle.

I also use the soft expanding foam in my trunk lid... I know the hard one can wrinkle your lid if you use too much. Either way, fill your trunk in small amounts at a time and let it fully dry before adding more... I learned the hard way and tried to dump 3-4 cans in at once and it took months to dry... all the while leaking the entire time.

 

The clay does squish out when you screw it down, that's why you don't screw it down all the way I like to leave 3-5mm of clay on each side of the mdf baffle.

Are you saying it's almost like a damper??

 

I also use the soft expanding foam in my trunk lid... I know the hard one can wrinkle your lid if you use too much. Either way, fill your trunk in small amounts at a time and let it fully dry before adding more... I learned the hard way and tried to dump 3-4 cans in at once and it took months to dry... all the while leaking the entire time.

lol..thats what it says on the instructions...

did you ever get that stuff off your paint?

 

I also use the soft expanding foam in my trunk lid... I know the hard one can wrinkle your lid if you use too much. Either way, fill your trunk in small amounts at a time and let it fully dry before adding more... I learned the hard way and tried to dump 3-4 cans in at once and it took months to dry... all the while leaking the entire time.

lol..thats what it says on the instructions...

did you ever get that stuff off your paint?

Lol... gonna have to repaint my bumper.

 

Honestly, this thread is one of the finest car audio pieces I've ever read in terms of concrete and effective ways to improve the sound quality in ANY car. However, one question:

Next, I glue a large sheet of egg carton foam behind the speaker location. These do hold water, so you may want to treat it to avoid mold growth.

I'd never thought of doing that, but it would certainly be a much cheaper (and IMO no less effective) treatment than Black Hole 5 or Deflex. What kind of treatment would prevent mold without stiffening the foam unduly?

 

Honestly, this thread is one of the finest car audio pieces I've ever read in terms of concrete and effective ways to improve the sound quality in ANY car. However, one question:



I'd never thought of doing that, but it would certainly be a much cheaper (and IMO no less effective) treatment than Black Hole 5 or Deflex. What kind of treatment would prevent mold without stiffening the foam unduly?

Use tent and tarp spray.

 

I'd never thought of doing that, but it would certainly be a much cheaper (and IMO no less effective) treatment than Black Hole 5 or Deflex. What kind of treatment would prevent mold without stiffening the foam unduly?

I too would like to know what products can be used to avoid having the egg crate mold or hold too much water.

 

I'd try using a closed cell acoustical foam like such:

http://www.soundprooffoam.com/closed_cell_foam.html

 

how do you think this stuff (wit the peel & stick backing) would work? 1/8" thick, but is supposed to be great. granted, its really expensive. Seems like it could be great for doors or trunk lid to add mass and give some good soundproofing at the same time.

 

My first post here guys Great site, I should of joined sooner!

Most excellent thread and thanks for the props, I do have a couple of comments for now though

1) Our product is now butyl based just like the big dogs, has been for some time now.

2) I use Ensolite foam behind the speakers instead of a Deflex pad or the egg crate stuff, it works rather well and costs practially nothing for such a small piece.

3) We, my son is now a part of what we do, are fellow enthusiasts first, business second, we love car audio and performance and will do all we can to help others achieve thier goals, wether or not you buy from us does not matter in the least, we are here to help

Thanks, have a great day!
Rick

 

I purchased a roll of the mat 60 from Raam Audio and they were very responsive. Very quick shipment which is always a nice thing to see

I haven't received the roll for installation yet but it should be here by the end of the week.

 

Instead of using regular sound deadening mat, would using non hardening clay to fill up the holes in the doors and layer the doors have the same effect as the mat? I figure the non hardening clay will do the same purpose of sealing up the door, adding mass, and reducing vibration. What do you guys think about this idea??

 

Filling small holes and divots in your doors with clay sounds like a pretty darned good idea to me. If you just filled in the low spots with clay, applying your actual door treatment would be easier as you would have to conform to a lot less terrain.

 

anyone have a favorite liquid deadner? I was thinking of picking up a 5 gal bucket of SS spectrum for $150 (seems like a good deal) to spray on my floor and in the trunk. Anyone know how effective this stuff is?

 

Liquid is ok... it's about the same effectiveness as mat but it can be easier to apply in some areas (like the roof or floor). I generally don't recommend it because it can be a chore to have to paint one layer, let it dry for half a day, paint another layer, on and on... whereas mat you just slap it on and you're done.

 

i loved the spectrum i bought. works well, its easy... and contrary to what everyone else is saying mine dried pretty damn fast, just work outside on a hot day. i would paint one door, go to the other and i could jump right back to the other as it was pretty dry by then.

 

yes, my spectrum dried fairly quickly too..faster then eD liquid crap! even if their newer products look better, i will never buy another product from them again. :x

anyways..

just added egg crate foam behind my mids!

cut to shape and cut small so they can fit through the door holes easily, then coated with A1 Fabric Shield and let to dry inside the car on a sunny day. When coating the edges, i overlapped to pieces so that i didnt waste any overspraying..

installed!

life of a speaker..

i also added 2 more square feet of Second Skin Damplifier (reg) to the outer panel of each door (near the locking mechanism) - i thought i might as well because i had the panel off...

Before: 1 to 2 layers of Damplifier Pro on outer panel, 1 layer on inner panel (door holes not pluged yet - need to get more dampener).

After: 1 sheet of egg crate foam on top of 2 layers of Damplifier reg/Pro on outer panel, and 1 layer on inner panel (door holes not pluged yet).

Subjective: Im not really sure if it was the extra 2 sq ft of dampener on the opposite side of the door from the speaker but i feel it made a pretty impressionable difference! The door sound much closer to NpDangs car with the mids sounding like theyre in a small monitor enclosure and less like theyre in a door! Bass, midbass and midrange sound more defined, cleaner and puchier. the change in overall sound also effected the staging/imaging. Staging and imaging raised and also were more defined.

I also tried opening the windows with the glass directly behind the woofer. its seemed to revert back to when i didnt have egg crate foam inside. midbass got a little harsh and uncontrolled.. so then i tried it with the windows half way down, leaving the glass clear of the back of the woofer and it still sounded good! i thought, maybe the difference in how much the window was open affected the sound so i opend the back windows to compensate but it still sounded good!

so in the end, i feel it made worthwhile difference!

heres my midbasses in case anyone hasnt seen it yet..

Goodtimes!

 

where did u get the a1 fabric shield?

 

i got it from A1 Foam & Fabrics since theyre kinda local.. but maybe you can find something online..? (i couldnt find A1 online)

 

Wow! This thread just keeps getting better and better! Great stuff here guys!

 

does the thickness of the foam matter? i have several sheets of 3/4" and 2" foam. not sure which to use. :? and would any spray sealer work? as long as the foam stays soft?