DIYMobileAudio.com Car Stereo Forum banner

Topping d10 wiring

21K views 52 replies 14 participants last post by  MrHarris  
#1 ·
Bit the bullet to move to a d10 after 1.5 years of nothing but problems with the helix usb hec. I have come across a few people using these but trying to get a solid answer as to weather the d10 needs an external power source or can be powered through the Apple camera adapater. There is a cable out of France that makes power both the camera adapter to charge and the d10 easy but no one in USA that makes one. Any thoughts?


Sent from my iPhone using Tapatalk
 
#4 ·
Absolutely no connection issues! Toslink cable is nothing special... I think I got it from monoprice. Yes dsp.3 but it also works just as well with my minidsp too.
You’ll need lightning cable to cck3 and then I think it’s a a-c usb to the d10 and then toslink to your dsp.
 
#7 ·
I use an Anker PD USB Hub that works with Android, Apple and Laptops.

Sent from my SM-G965U using Tapatalk
 
  • Like
Reactions: BitPerfect_
#10 ·
Forgive my ignorance, but the D10 in this setup is only there to convert the digital signal from USB to optical correct? Are there not devices that can do this without a built in DAC? Seems like a waste to have the DAC and not use it.
 
#26 ·
I am looking for a similar setup. I want to remove my hu and all analog connections.

So the dsp powers on with the source from the phone?

I don't need any other power sources? Amps, dsp etc will get on when I play the music?

I was looking at using the below;
 
#27 ·
I am looking for a similar setup. I want to remove my hu and all analog connections.

So the dsp powers on with the source from the phone?

I don't need any other power sources? Amps, dsp etc will get on when I play the music?

I was looking at using the below;
No the dsp will need either an ignition feed or a 12v switched feed of some kind to switch on, there is no auto switch on for a digital in on any dsp I’ve ever seen, it’s normally from analogue input that this works 👍🏼
 
#32 · (Edited)
Thank you very much, it's pretty clear now.
With fixed output there is no sense. Also I didn't know that not all the iPhones deliver Apple Music in the same way (max 24/192).

I am interested into a solution for the home environment and I just landed here looking for U2 details reading your posts thinking that it's the right solution.

I'll wait until the next Apple AirPlay upgrade and see how it goes (if there will be any) or Spotify Hifi maybe connect(?).
We will see. All the best,
 
#40 ·
Ok go you have a photo or model number? I am only seeing 110v products. My current car charger isn't up to the task.
 
#42 ·
#43 ·
#44 ·
I have iPhone6s / Topping D10s / Optical to DSP Amplifier combination
First I had aftermarket CCK3 adapter (powered by a simple lighter), it generally did not work (rarely worked)
Then, I added that French cable for powering the D10s in the trunk, now the sound is fine, working
But my phone is still not being charged

I am trying to figure out what is wrong while everyone's only CCK3 setup charges the phone, but mine is not charged although I have 2 different power suppliers (French cable for topping D10s, CCK3 for the phone)

Is it because my CCK3 adapter is aftermarket? or my cigarette lighter charger adapter thing is not sufficient?

FYI, so called the French cable which I added additionally to CCK3 adapter :
Image
 
#48 ·
Just get an apple cck3, they work with the supplemental power supply (I cut up a second usb lead to make a spliced in power supply for the topping rather than buy the French lead and putting more junctions in the pathway)
 
#50 ·
Dears,
Do you use official apple lightning cable for powering the official apple cck3 adapter?
Powering cable usb end is connected to a lighter adapter, do i need a specific one for this as newer apple phones adapter is 20w